![]() |
454 rebuild complete
1 Attachment(s)
Very pleased w/ the results, and good torque too!!!!
|
Re: 454 rebuild complete
:drink: :drink:
|
Re: 454 rebuild complete
Can you tell us what goodies you have inside the engine. Heads, cam, compression ratio... :D
|
Re: 454 rebuild complete
Jeff knows more than me... hopefully he'll chime in when he comes back from the FT laud races.
|
Re: 454 rebuild complete
No doubt in my mind that you should crack 80mph with the right prop... :D
You may want to figure out a way to sit rather than standing at that speed... :eek: Good Luck Storm! Hope to see you out there this Summer... :drink: |
Re: 454 rebuild complete
Finally ready for the water test tonight.
Gonna try to dial in a labbed 26 B1. UH, Can i leave my office yet??? :evilb: :D :evilb: :D :drink: |
Re: 454 rebuild complete
Originally Posted by Stormrider
Finally ready for the water test tonight.
Gonna try to dial in a labbed 26 B1. UH, Can i leave my office yet??? :evilb: :D :evilb: :D :drink: |
Re: 454 rebuild complete
Originally Posted by Dave M
Congrats! I bet you are going to need more than 26P. I'm turning a 28P to almost 5K with only 425HP.
Storm is shooting for 5700rpm... :eek: If he gets there with a 26p... 81-82mph :evilb: |
Re: 454 rebuild complete
That labbed 26 was a pc o'sh*te. It was labbed w/ a hammer.
Could barely get past 5100rpm. Probably need to run a 24P. |
Re: 454 rebuild complete
Congrats on the #'s
Which 454 did it start out being,HP? Rob :D |
| All times are GMT -5. The time now is 11:23 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.