same couplers, same u joints,same mounts, Tinkerboater is going to bring his alignment tool over tonight that way I know where to start.

Did you put the mounts on the same side they were before. The L angles are drilled to align the front of the engine. Subtle changes can have big effects.
Use an alignment tool. See what needs to be changed.
You can make a 3 hole or slotted shim to put between the mount and engine if it's minor.
If major changes are needed, redrill the L angles.
Gary

New flywheel housings? The latest version does not use spring washer.

I see you got it fixed although I can't imagine Foul being any help

Can you let us know what you had to do to take care of the problem?

Yes please post the problem so others (me) can avoid it!

Mike was great moron support! we got it handled last night, took everything lose and used and alignment tool, all set ! Thank God!!!

Come on Dyno, your not telling us what you found!! We need to learn from your experience.

"Chasing knowledge" one post at a time

Yes, come on now and let us know! Everyone needs moron support sometimes (except for me... ).

Maybe he's to embarrsesd to tell us what he forgot to do???
Common fess-up, we promise we won't laugh!!!

I just took all the bolts lose replaced two of them with a tapered pin jumped up and down on them a couple times and bingo! engine aligned.That was the port motor the starboard just needed the gimbal bearing straightened out with the alingment tool.