Piston "?"
07-13-2005 | 12:47 PM
#1
Thread Starter
Registered
Joined: Jan 2003
Posts: 6,019
Likes: 1,521
From: Grand Rapids, MI
Piston "?"
I took off my heads last night, High performance chevy rectangular port. And the pistons had "L 2399 030" on them. The engines supposedly started life as Merc 425's. The heads have had some bowl porting and now have 114.5 cc stamped on them. My cranking compression is 170 lbs on the cylinders without the blown head gasket. Any Ideas as to what the compression ratio is and what cc pistons I have, or just flat tops? I believe they are TRW pistons.
Thanks
Thanks
07-13-2005 | 01:33 PM
#2
MarineKinetics
Joined: Oct 2002
Posts: 942
Likes: 5
From: Rochester, NY
Re: Piston "?"
Rookie,
The L 2399 +.030 is a open chamber TRW forged piston. It has a .095 dome and a 1.645 compression height. They should net approx 9.1:1 CR @ 115 CC combustion chamber depending on the deck and gasket used.
Bob
The L 2399 +.030 is a open chamber TRW forged piston. It has a .095 dome and a 1.645 compression height. They should net approx 9.1:1 CR @ 115 CC combustion chamber depending on the deck and gasket used.
Bob
Thread
Thread Starter
Forum
Replies
Last Post
Ben@SRP
Trucks, Trailers and Transportation
14
10-13-2006 09:11 AM
ActiveFun
General Boating Discussion
0
04-26-2004 09:42 PM
mikesufka
General Boating Discussion
8
12-26-2002 11:23 AM
