Replacing ignition switch
#1
Thread Starter
Registered
Joined: Aug 2005
Posts: 121
Likes: 0
From: whitby,ontario
My ignition switch failed this weekend in my Baja H2X. I am thinking or making a custom setup, possibly with a push button start. Last time I used a airplane switch with cover plate. Anyone have a pics of their ignition or any ideas of where to buy a ready made push button starter?
Thanks
RYAN JOHANSEN
2000 BAJA H2X BOSS
Thanks
RYAN JOHANSEN
2000 BAJA H2X BOSS
#3
Registered
Joined: Jan 2006
Posts: 733
Likes: 2
From: St Louis/LOTO
I've set up a couple engine room control boxes with the wiring harness plugin, an ignition on/off toggle with a cover plate, and a push button start switch. It made tuning and winterizing easy.
Never did it at the helm. If you do, be sure to use a push button switch with a guard around it. There might be bad results for your starter or flywheel gear if you accidentally hit it at 5000 rpm.
Gary
Never did it at the helm. If you do, be sure to use a push button switch with a guard around it. There might be bad results for your starter or flywheel gear if you accidentally hit it at 5000 rpm.
Gary
Thread
Thread Starter
Forum
Replies
Last Post
Sydwayz
General Boating Discussion
0
07-05-2007 09:40 PM




