engine flywheel coupler for b/w trans
#1
Registered
Thread Starter
engine flywheel coupler for b/w trans
A friend of mine is looking for a source for Heavy Duty engine flywheel couplers for a Borg Warner trans setup, 700hp motors.
I bought a pair of nice pieces from Innovation Plate, or Gear, in Georgia (I can't remember the exact company name) about 1 1/2 years ago, and can't find the receipt for contact info. Also can't find them with a web search.
Anyone know if these guys are still around? Better yet, a phone number for them?
Other suggestions, besides the Merc HP piece for ~$600/ea? Pretty sure i paid $275/ea for mine.
Thanks,
Brian
I bought a pair of nice pieces from Innovation Plate, or Gear, in Georgia (I can't remember the exact company name) about 1 1/2 years ago, and can't find the receipt for contact info. Also can't find them with a web search.
Anyone know if these guys are still around? Better yet, a phone number for them?
Other suggestions, besides the Merc HP piece for ~$600/ea? Pretty sure i paid $275/ea for mine.
Thanks,
Brian
Last edited by p4-33; 09-23-2005 at 06:59 PM.
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: engine flywheel coupler for b/w trans
We have a plate made to our spec, it has a dish in it so you don't have to cut the flywheel for clearance, it also engages the transmission input shaft better than the flat plate.
http://cyborgtransmissions.com/intal...ccessories.htm
We sell them for $349
http://cyborgtransmissions.com/intal...ccessories.htm
We sell them for $349
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Thread
Thread Starter
Forum
Replies
Last Post
ddabal
Do It Yourself, Boating on a Budget
5
07-08-2008 01:40 PM