Bowl Porting Heads on 500hp, worth it?
#11
Charter Member #30
Charter Member
Re: Bowl Porting Heads on 500hp, worth it?
Originally Posted by BenPerfected
My opinion is you are probably wasting time and money. JimV frenquents this board and he is a VERY knowledgeable head porter and he builds marine engines. You should consider whatever he recommends.
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!
#13
Charter Member #30
Charter Member
Re: Bowl Porting Heads on 500hp, worth it?
Stayed with the stock ignition and limiters. I decided the crane 731 would work best for my combo and by the way it runs I would say I made the right choice.
The headwork was done exactly as KAMAA described above with a little removed from the surface to make up for the chamber work and help maintain the stock compression.
The headwork was done exactly as KAMAA described above with a little removed from the surface to make up for the chamber work and help maintain the stock compression.
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!
Last edited by Scott; 10-25-2005 at 11:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1BIGJIM
General Q & A
14
04-25-2008 07:32 PM
nauticaL ILLUSIONS
General Q & A
7
07-22-2003 12:16 PM