330/454 Bravo 1
#1
Registered
Thread Starter
Join Date: Nov 2003
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
330/454 Bravo 1
I have a 1990 Bravo 1, 330/454. When I start it up, it will run for around 10 to 15 seconds and shut off, just like if I were to turn the key off. All the gauges go dead. Is there an engine shutdown integrated with the audio alarm system? I know the oil pressure switch needs replacing. I tested it. Would this shut the motor off or just sound the audio alarm?
#2
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: 330/454 Bravo 1
If efi or mpi mtr there is a shut off that works off of oil press that works off of its own sender and is either over the oil filter ( if block mounted ) or teed off where the regular sender is
Last edited by GOODT; 02-26-2006 at 01:10 PM.
#9
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: 330/454 Bravo 1
with out going through 50 questions.. id first look at the coil after the mtr stalls feel coil check if hot a quick guess would be a shorting coil... would cause mtr to die and could short dash
what happens is it gets hot, windings expand and short
cools down and windings separate
have seen it many times never saw dash short but it could since the purple wire to to coil also powers your gauges
what happens is it gets hot, windings expand and short
cools down and windings separate
have seen it many times never saw dash short but it could since the purple wire to to coil also powers your gauges