need bravo help!
#1
Registered
Thread Starter
Join Date: Feb 2005
Location: nokomis florida
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
need bravo help!
im changing the gears in my late 90's bravos to 1:50's and the gears i got are the X-drives which are supposed to be stronger,im wondering if any bravo guru;s know what else has to be changed to make them work,i see they use different shims and such and maybe the clutch.call me or write me 941-302-3828,
scott
scott
#2
VIP Member
VIP Member
Re: need bravo help!
Call Mark @ Bam, he'll know
954-545-8681
954-545-8681
#3
Charter Member #601
Charter Member
Re: need bravo help!
Scott,
the clutch, shift fork, tower races, shims, thrust bearings, inner thrust bearings, just about everything in the upper.. There is a kit that provides all the parts needed to switch, much better cost for all the parts..
Hope this helps
Dick
the clutch, shift fork, tower races, shims, thrust bearings, inner thrust bearings, just about everything in the upper.. There is a kit that provides all the parts needed to switch, much better cost for all the parts..
Hope this helps
Dick
#4
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: need bravo help!
Originally Posted by Mr Gadgets
Scott,
the clutch, shift fork, tower races, shims, thrust bearings, inner thrust bearings, just about everything in the upper.. There is a kit that provides all the parts needed to switch, much better cost for all the parts..
Hope this helps
Dick
the clutch, shift fork, tower races, shims, thrust bearings, inner thrust bearings, just about everything in the upper.. There is a kit that provides all the parts needed to switch, much better cost for all the parts..
Hope this helps
Dick
This is correct only way to go!!!!!
#5
Registered
Thread Starter
Join Date: Feb 2005
Location: nokomis florida
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Re: need bravo help!
thanks guys, now i have a direction
do you think its worth it to upgrade or should i send the gears back and just stick with the stocker
do you think its worth it to upgrade or should i send the gears back and just stick with the stocker
Thread
Thread Starter
Forum
Replies
Last Post
1BIGJIM
Drives and Lower Units
3
06-10-2008 12:46 PM
rslick
General Q & A
13
06-15-2005 11:54 PM