Converting PM300's to 25"
#1
Registered
Thread Starter
Join Date: Feb 2005
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Converting PM300's to 25"
I am in the process of converting a pair of 1999 Merc ProMax 300's with Sportmaster gearcases from 20 to 25". I have all the parts to do this except the longer studs which attach the lower unit to the mid section with the spacer in between. BAM cant help - Merc hasent answered - HELP!
The two studs BAM sells are M12 x 183 - millimeters - which is 7.2" in length and I am assuming 12 threads per centimeter. The other one is M10 x 173 which is (I think) 6.8" long. I need the longer one (I think) but looking at their pics they specify the M10 nut for the Sportmaster.....HELP!
Thanks, TJ
The two studs BAM sells are M12 x 183 - millimeters - which is 7.2" in length and I am assuming 12 threads per centimeter. The other one is M10 x 173 which is (I think) 6.8" long. I need the longer one (I think) but looking at their pics they specify the M10 nut for the Sportmaster.....HELP!
Thanks, TJ
#2
~~~~
Charter Member
Re: Converting PM300's to 25"
Start a thread over at www.screamandfly.com
The guys and gals over there live and breath performance outboards.
The guys and gals over there live and breath performance outboards.
Thread
Thread Starter
Forum
Replies
Last Post
mikesufka
General Boating Discussion
8
12-26-2002 11:23 AM