Hex head vent/drain plug
#1
Thread Starter
Registered

Joined: Dec 2000
Posts: 1,239
Likes: 5
From: Loto, MO
Does anyone have a link or name for the company that has the hex head version of the vent/drain plug used on the bravo drive. I remember seeing it on here but my search did not show it.
Thanks,
Rick
Thanks,
Rick
#2
Hex Drain Plug
All Seasons Marine, Inc.
702-293-4499
All Seasons Marine, Inc.
702-293-4499
#5
Here's a pict.
#7
Thread Starter
Registered

Joined: Dec 2000
Posts: 1,239
Likes: 5
From: Loto, MO
Thanks guys,
Mark I went with Imco's, thanks for the heads up on the plastic gasket. I have the drives sitting in the shop. Marine Drives did a great job. The paint finish is better than the factory. If the inside is setup as good I couldn't ask for more. Transom is painted and hope to start assembly this weekend and engines going in next weekend. Lots of work left and not too many weekends before we are kicked out of the building.
Rick
Mark I went with Imco's, thanks for the heads up on the plastic gasket. I have the drives sitting in the shop. Marine Drives did a great job. The paint finish is better than the factory. If the inside is setup as good I couldn't ask for more. Transom is painted and hope to start assembly this weekend and engines going in next weekend. Lots of work left and not too many weekends before we are kicked out of the building.
Rick





