Bilge pump/sink drain and tank vent dimensions?
04-04-2008 | 01:59 PM
#1
Thread Starter
Registered
Joined: Aug 2006
Posts: 2,090
Likes: 0
From: IAD/FLL
Bilge pump/sink drain and tank vent dimensions?
Looking to replace the original white thru hull drains with these and want to make sure they'll fit:
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=013
Also looking at replacing the fuel and water tank vents with these:
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=018
or these:
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=023
I'm leaning towards the Attwood vents since they require a smaller mounting hole (in case I have to enlarge) and the vent head is removable for cleaning.
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=013
Also looking at replacing the fuel and water tank vents with these:
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=018
or these:
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=023
I'm leaning towards the Attwood vents since they require a smaller mounting hole (in case I have to enlarge) and the vent head is removable for cleaning.
