Help wiring stock coil to MSD Blaster coil
04-23-2006 | 10:21 AM
#1
Thread Starter
Registered
Joined: Jul 2002
Posts: 404
Likes: 2
From: Minnesota
Help wiring stock coil to MSD Blaster coil
So I'm replacing my stock coil with a MSD blaster coil the stock coil has four weirs on it with two plugs a black plug with a pink and a brown wire and a gray plug with a ren and White wire the MSD coil only has two connectors a negative and a positive post So I'm thinking the red and White go to the positive and the pink and brown go to the negative????
04-23-2006 | 11:18 AM
#2
Registered
Joined: Jan 2005
Posts: 573
Likes: 1
From: Newport Beach,CA
Re: Help wiring stock coil to MSD Blaster coil
It sounds like you have the Delco EST distributor and coil and your trying to replace the coil with a different type. If that is the case if may not work very well.
There is an exact replacement Blaster Coil for your system (MSD part #8226). You may want to get the right coil.
Dave
There is an exact replacement Blaster Coil for your system (MSD part #8226). You may want to get the right coil.
Dave
