Go Back  Offshoreonly.com > Technical > General Q & A
Arizona Speed & Marine Ingenious????????? >

Arizona Speed & Marine Ingenious?????????

Notices

Arizona Speed & Marine Ingenious?????????

Thread Tools
 
Old 04-24-2006 | 06:03 PM
  #1  
Cattitude's Avatar
Thread Starter
Registered
 
Joined: Jun 2001
Posts: 1,213
Likes: 0
From: Tulsa, OK, Grand, Beaver, LOTO
Default Arizona Speed & Marine Ingenious?????????

Anybody using this? How do they like it?

I'm having a hard time justifying the coin myself but hope to get the local Dyno shop to spring for it- I'd gladly pay him a bit more to tweak an EFI setup
Cattitude is offline  
Reply
Old 04-24-2006 | 06:13 PM
  #2  
Registered
 
Joined: Apr 2005
Posts: 62
Likes: 2
From: Castro Valley, California
Default Re: Arizona Speed & Marine Ingenious?????????

So, what is the question, am I missing something?
Bubbletop409 is offline  
Reply
Old 04-24-2006 | 06:27 PM
  #3  
Cattitude's Avatar
Thread Starter
Registered
 
Joined: Jun 2001
Posts: 1,213
Likes: 0
From: Tulsa, OK, Grand, Beaver, LOTO
Default Re: Arizona Speed & Marine Ingenious?????????

Originally Posted by Bubbletop409
So, what is the question, am I missing something?
It's the part with the 2 question marks

Who's using it and what do they have for feedback
Cattitude is offline  
Reply
Old 04-24-2006 | 06:40 PM
  #4  
pachangalpina's Avatar
Registered
 
Joined: May 2002
Posts: 931
Likes: 0
From: Cumming GA
Default Re: Arizona Speed & Marine Ingenious?????????

Does it work with any MEFI computer or just ones that they have initially programmed? I thought it was for specific computers (MEFI-4b) that were setup by them and if it is to be used for multiple units, they had to be initally setup also.
pachangalpina is offline  
Reply
Old 04-24-2006 | 06:50 PM
  #5  
Cattitude's Avatar
Thread Starter
Registered
 
Joined: Jun 2001
Posts: 1,213
Likes: 0
From: Tulsa, OK, Grand, Beaver, LOTO
Default Re: Arizona Speed & Marine Ingenious?????????

From what I understand I'd have to buy a mefi 4 and go from there- but from then on I can tune it all I want
Cattitude is offline  
Reply
Old 04-24-2006 | 07:26 PM
  #6  
Linster's Avatar
Off the Radar
 
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
Default Re: Arizona Speed & Marine Ingenious?????????

Originally Posted by Cattitude
From what I understand I'd have to buy a mefi 4 and go from there- but from then on I can tune it all I want
From what they say on the web site, the software will only work with that one computer. They put some kind of ID on it. I called and asked if I could buy one and use it with 2 computers & was told no. WIll not work with MEFI 3 for some reason.
Linster is offline  
Reply
Old 04-25-2006 | 03:23 PM
  #7  
Registered
 
Joined: Apr 2005
Posts: 62
Likes: 2
From: Castro Valley, California
Default Re: Arizona Speed & Marine Ingenious?????????

Well pardon my ignorance, I thought INGENIOUS was a statement, not a product.
Bubbletop409 is offline  
Reply
Old 04-28-2006 | 02:56 PM
  #8  
Advantage 27's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Sep 2005
Posts: 65
Likes: 1
From: Ste Genevieve, MO
Default Re: Arizona Speed & Marine Ingenious?????????

FYI if anyone is still wanting info on this. There is an article in the June issue of Family & Performance Boating.
Advantage 27 is offline  
Reply
Old 07-17-2007 | 07:35 PM
  #9  
jryan26's Avatar
Registered
 
Joined: Sep 2003
Posts: 1,954
Likes: 1
From: Oklahoma
Default

I have it on 2 recently purchased motors. But they have az speed/marine programmable computers. They came with a key with the original program on it.
jryan26 is offline  
Reply
Old 07-17-2007 | 10:09 PM
  #10  
Registered
 
Joined: Aug 2005
Posts: 225
Likes: 0
From: Sandusky, OH
Default

Before you guys get into it. Talk to Scarab98 (Tom). He got it this year and had a horrible experience with it. Cost him his entire motor. Basiscally in a nut shell the program would whack out once in a while for no apparent reason and change all the settings. The last time it did it it went way too rich which in turn diluted the oil to the point that it spun the main bearings. Bad enough to where it couldn't be lined bored so he's waiting on a new block and crank. By the time he figured out what was going on it was too late, the damage was done. The only thing that could have let him know what was going on was his O2 sensor but that wasn't working. I'll let him know about this thread and he can elaborate
The sad part is he can't even get Jim to return his phone calls to talk about it and it has been over a week.
turnerrd is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.