Electrical connectors and Tool ...
05-02-2006 | 11:47 AM
#2
Registered
Joined: Feb 2006
Posts: 53
Likes: 0
From: Lake Champlain
Re: Electrical connectors and Tool ...
I use these bullet connectors for all my connection with heat shrink, I have never found them cheaper than this:
Fully Insulated Bullet Connectors
Any crimper should do fine...
Fully Insulated Bullet Connectors
Any crimper should do fine...
05-02-2006 | 04:26 PM
#3
Registered
Joined: Oct 2000
Posts: 650
Likes: 0
From: Lombard, Il
Re: Electrical connectors and Tool ...
I've been getting heat shrink connectors from bestboatwire.com.
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan
05-02-2006 | 07:26 PM
#4
Thread Starter
Registered
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
Re: Electrical connectors and Tool ...
Originally Posted by Zanie
I've been getting heat shrink connectors from bestboatwire.com.
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan
