Crane HI-6M Ignition
05-11-2006, 10:27 AM
#11
Registered
Join Date: May 2002
Location: Cumming GA
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crane HI-6M Ignition
Motorstate is currently out of stock of these. As well as most places.
MSD and Crane both recommend using anti-vibration mounts and not to mount to engine. I still mount mine to the engine but the mount bracket has rubber bushings and the boxes are mounted to the bracket the same way.
MSD and Crane both recommend using anti-vibration mounts and not to mount to engine. I still mount mine to the engine but the mount bracket has rubber bushings and the boxes are mounted to the bracket the same way.
05-11-2006, 02:51 PM
#12
Where To
VIP Member
Join Date: Nov 2001
Location: Alexandria Bay, NY 1000 Islands
Posts: 2,517
Likes: 0
Received 3 Likes
on
3 Posts
Re: Crane HI-6M Ignition
I mounted mine on the transom between the exhaust. It's only about 10" from the coil and distributor. I used hanger bolts (screw on one end and regular threads on the other and put a rubber bushing in between the box and the boat.
Dave
Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
Air, Sea, and Land...Exploring the planet in 3-D!
05-11-2006, 02:53 PM
#13
FIERCE ALLEGIANCE
Platinum MemberThread Starter
Join Date: Jun 2003
Location: West palm Beach, FL & SML VA
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crane HI-6M Ignition
Originally Posted by axapowell
I mounted mine on the transom between the exhaust. It's only about 10" from the coil and distributor. I used hanger bolts (screw on one end and regular threads on the other and put a rubber bushing in between the box and the boat.
Dave
Dave
05-11-2006, 03:27 PM
#15
FIERCE ALLEGIANCE
Platinum MemberThread Starter
Join Date: Jun 2003
Location: West palm Beach, FL & SML VA
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crane HI-6M Ignition
Originally Posted by hudsonslingshot
What are you doing for motors jim??
Right now just rebuilding the HP500's. New Heads/Cams and intakes. Should be around 550 maybe 600HP if I'm lucky.
Winter project will be to either supercharge these or just find new power. I'd like to just get the boat in the water this year.
05-11-2006, 03:38 PM
#16
Registered
Re: Crane HI-6M Ignition
When you mount it spend some time and relocate the stock components nearby. You can then plug n play between them if the Crane box fails. Only need to carry the spare rotor then. I have run my used Crane box for years and it still works fine.
05-11-2006, 03:43 PM
#17
FIERCE ALLEGIANCE
Platinum MemberThread Starter
Join Date: Jun 2003
Location: West palm Beach, FL & SML VA
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crane HI-6M Ignition
Originally Posted by BadDog
When you mount it spend some time and relocate the stock components nearby. You can then plug n play between them if the Crane box fails. Only need to carry the spare rotor then. I have run my used Crane box for years and it still works fine.
Good idea.
05-11-2006, 04:45 PM
#18
FIERCE ALLEGIANCE
Platinum MemberThread Starter
Join Date: Jun 2003
Location: West palm Beach, FL & SML VA
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crane HI-6M Ignition
