what's involved in removing a Procharger?
#11
Registered
Re: what's involved in removing a Procharger?
Get a copy of the installation instructions from ProCharger and take note of everything that was removed or modified for your engine.
For MY set up it included water pump, oil filter bracket, tensioner pulley, cooling hoses that were cut, fuel pressure regulator, fuel pump, drive belts, fuel lines, oil lines, and a smaller prop. I suspect there's other items that I don't remember right now. No special tools are needed.
For MY set up it included water pump, oil filter bracket, tensioner pulley, cooling hoses that were cut, fuel pressure regulator, fuel pump, drive belts, fuel lines, oil lines, and a smaller prop. I suspect there's other items that I don't remember right now. No special tools are needed.
#12
Registered
Re: what's involved in removing a Procharger?
Originally Posted by Essex29
I'm looking for some info on removing a Procharger from my hp500. I am selling the boat and want to keep the procharger for a 540 I am having built. Is it labor intensive? Does the motor have to come out?
Also, I bought setup from a guy that added a Whipple to a 525 , can I use it on a 540? I know I need to have the ecu reprogrammed, but what else ? Will the injectors from the 525 work? Who would you recommend to reprogram for the Procharger?
Thanks in advance!
Also, I bought setup from a guy that added a Whipple to a 525 , can I use it on a 540? I know I need to have the ecu reprogrammed, but what else ? Will the injectors from the 525 work? Who would you recommend to reprogram for the Procharger?
Thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post
ActiveThunder
General Boating Discussion
49
02-24-2008 07:18 PM