Oil line to remote filter
#1
Registered
Thread Starter
Oil line to remote filter
Well I'm relocating my oil fliter to make room for the headers. It's a 1998 502 efi and all my factory lines are 1/2" flare. So in the oil cooler I have an inverted flare. What's the best way to lengthen the lines? Does anyone make an adapter to go from 1/2" inverted flare to 8an? Or does everyone normally have new lines made up?
Thanks
Frank
Thanks
Frank
#3
Registered
Thread Starter
Re: Oil line to remote filter
If your upgrading the cooler then I would just buy a new adapter and remote filter pad. Then everything will be national pipe thread, you wouldn't have any flare fittings to deal with.
Frank
Frank
#4
Registered
VIP Member
Join Date: Jan 2006
Location: Newport, RI
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oil line to remote filter
Originally Posted by ls1nova
If your upgrading the cooler then I would just buy a new adapter and remote filter pad. Then everything will be national pipe thread, you wouldn't have any flare fittings to deal with.
Frank
Frank