backfire above and near 3000 rpm's?
06-26-2007, 10:52 PM
#52
Registered
Join Date: Mar 2007
Location: Clinton Twp. Mi
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I just had the same problem with my 350 mag. I had 2 plug wires reversed. I was positive I had it right, untill I spent a couple hundred on parts I didn't need and did some checking.
06-26-2007, 11:48 PM
#53
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
The next bad coil I find will be the first bad coil I've found, even though many times I convince myself it HAD to be a bad coil. I have several extra coils laying around to prove it. Usually when someone tells me they fixed their problem by changing a coil, it's because they most likely fixed the bad connection to the coil. There's not a whole lot that can go wrong inside a coil. It's just a big winding of wire. Anything bad on a coil you most likely will be able to see from the outside, like a crack.
07-16-2007, 01:41 PM
#56
Registered
Thread Starter
Join Date: Jul 2005
Location: Napa, CA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
OK my friends refer to me as Ricky the re re. for a whole year I thought it was more serious. its official The #5 and #7 wires were swapped. went out yesterday now without the new stuff I bought and can tell I am not getting full throttle only reved to 4000 rpm but felt like it had more. 54 on gps with 19inch mirage plus.
