I am going to use the two 10" subs under the rear bench seat in my 29' Warlock World Class(running free air). My question is fastening the new box to the front panel the speakers are already mounted to. I am going to use 3/4" MDF and resin the whole thing. Once cured I was going to use a ton of carpenters glue and screws to fasten it to the current wood there. I was going to use clamps also to get the tightest fit possible. The next day I will install the subs and away I go. Is this the best way to do this?

i use a down fire box into a nonrestrictive vent cust. love it keeps weather out and uv off speakers also i use weather tite elmers on m.d.f joints

any pics of it? I am trying to use what I have. Thanks!

what do you mean by non restrictive vent cust.?

The Mouth Of The Vent Cannot Be Smaller Than The Sq. Inch Of The Face Of The Speaker And Or Port Or You Will Change The Tunning Freq. Of The Box And No I Donot Have Pics But I Have Done Many From Lake St.claire Mi To Daytona Fl. Call Me And I Can Give You More Info 352-753-jams