Offshoreonly.com
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Best pulled motor times (https://www.offshoreonly.com/forums/general-q/134448-best-pulled-motor-times.html)

otis311 07-09-2006 08:29 AM
Re: Best pulled motor times
 
Anthony, When are you coming up ?? Ill be leaving to go to Niagra Falls for union meetings on Sunday am and wont be home until Saturday am. I will be around all week after that. I am on Vacation the last week in July. Rick Peek is also on Vacation that week, so it should be a great time....If you get your oil changed !!

otis311 07-09-2006 08:32 AM
Re: Best pulled motor times
 
BTW..Ive had alot of practice pulling my engines in years past. Those are pretty good times considering the room you have to work with in the bilge. Welcome to the world of high performance boating my friend

nordic95 07-09-2006 08:50 AM
Re: Best pulled motor times
 
Otis,

We were planing on coming up on Sat. the 15th and staying till the 31th. But now that I'm doing some work to the motors I will not be getting them back till the 14th,putting them in on the 15th,testing on the 16th and then driving right up to the lake.Hopefully they run ok or I may need your boat :rolleyes:

Nordic95

nocigarette 07-09-2006 09:33 AM
Re: Best pulled motor times
 
2 Attachment(s)
about 40 min but i have race hatches i just pull pins and throw them in the grass......12 bolts i plug out she comes....

nordic95 07-09-2006 10:05 AM
Re: Best pulled motor times
 
Originally Posted by nocigarette
about 40 min but i have race hatches i just pull pins and throw them in the grass......12 bolts i plug out she comes....
I had a JD 400.I miss that machine.Now I bought the Kabotoa BX23 to cut grass and has small bucket and hoe.No where neer big enought to reach into engine bay.But it moves the boat and quad trailers around the yard fine.
Nordic95

nordic95 07-09-2006 02:42 PM
Re: Best pulled motor times
 
Originally Posted by Tantrum
That was very nice of you to pull the motors so Cathy could clean the bilge :eek: :drink:

Tantrum PLEASE dont give Ant any ideas i already wash and wax the hunk of resin! :rolleyes: :drink:
Cathy(Mrs. Nordic)

TeamSaris 07-09-2006 02:57 PM
Re: Best pulled motor times
 
Originally Posted by OhioRiverCigarett
Who has the best way/ devise to pull engines? I am thinking about a I beam on two concrete piers for now. I am interested to see how other people are doing it.
We have a big overhead crane rated for 4000lbs.

TeamSaris 07-09-2006 03:00 PM
Re: Best pulled motor times
 
Originally Posted by nordic95
Otis,

We were planing on coming up on Sat. the 15th and staying till the 31th. But now that I'm doing some work to the motors I will not be getting them back till the 14th,putting them in on the 15th,testing on the 16th and then driving right up to the lake.Hopefully they run ok or I may need your boat :rolleyes:

Nordic95
Come down to the shop if ya break sumthin... :D But I hopw you dont. Have fun on LG!!!!

nordic95 07-09-2006 06:17 PM
Re: Best pulled motor times
 
Originally Posted by fast fun 2
Come down to the shop if ya break sumthin... :D But I hopw you dont. Have fun on LG!!!!
I thought you were going to band camp?If you are can I use your boat???? :D :D no really :eek:


Nordic95

Panic Button 07-09-2006 11:48 PM
Re: Best pulled motor times
 
1 Attachment(s)
A little over 2 hours.


All times are GMT -5. The time now is 07:21 PM.
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.