More TRS questions!
07-17-2006, 09:27 PM
#1
Registered
Thread Starter
Join Date: Mar 2005
Location: Mine Hill, NJ/Lake Hopatcong, NJ
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
More TRS questions!
What drive will bolt up to a TRS transom?
What lowers will fit on the TRS uppers and if so will they be shorter?
Thats all, thanks in advance
What lowers will fit on the TRS uppers and if so will they be shorter?
Thats all, thanks in advance
07-18-2006, 12:15 AM
#2
Platinum Member
Platinum Member
Re: More TRS questions!
1. just TRS will bolt up
2. Speedmaster II lowers will bolt up to a TRS upper, but the drives will sit lower in the water.
2. Speedmaster II lowers will bolt up to a TRS upper, but the drives will sit lower in the water.
07-18-2006, 12:45 AM
#3
Registered
Re: More TRS questions!
phughes69 is partially correct.
The SSMII will bolt up and IS deeper.
However, a Konrad PRS 540 will also "Bolt up" to a TRS transom unit or to a TRS Gimbal. It is 1.66"shorter than the TRS and is far far more reliable. In fact Konrad has yet to have one 540 fail in service.
The SSMII will bolt up and IS deeper.
However, a Konrad PRS 540 will also "Bolt up" to a TRS transom unit or to a TRS Gimbal. It is 1.66"shorter than the TRS and is far far more reliable. In fact Konrad has yet to have one 540 fail in service.
07-19-2006, 09:19 AM
#5
Re: More TRS questions!
A full standard Konrad conversion (including transom assembly) retails for $11,995
Feel free to contact me for more info.
Kurt
[email protected]
Feel free to contact me for more info.
Kurt
[email protected]
07-20-2006, 10:34 PM
#7
Re: More TRS questions!
Originally Posted by gripit
What advantages if any would a SMMII lower bolted to a TRS achive?
None, the SSMII lower is about 2" deeper than the TRS.
Also there are NO parts available for the SSMII.
And actually the SSMII unit was not as durable as the TRS lower.
Kurt
