#6 drives, what other options are there?
#2
Platinum Member
Platinum Member
Re: #6 drives, what other options are there?
Nothing, everything else is smaller.
You'll need to glass it up and re rig if you want to go back the other way.
What's your project and your goal?
Cougarman
You'll need to glass it up and re rig if you want to go back the other way.
What's your project and your goal?
Cougarman
#3
Registered
Thread Starter
Join Date: Oct 2002
Location: Cincinnati, Ohio
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: #6 drives, what other options are there?
Thanks for the info.
I was told there is a box and smaller setup but I can't find any details. Does konrad have anything for this setup?
I was told there is a box and smaller setup but I can't find any details. Does konrad have anything for this setup?
#4
Registered
Re: #6 drives, what other options are there?
Cougarman is probably right....Check with Stelling & see if they make a conversion box for that ?....How much smaller is a V or 3a ?
#5
Registered
Thread Starter
Join Date: Oct 2002
Location: Cincinnati, Ohio
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: #6 drives, what other options are there?
paul, you were going to be my next call to see what you knew if I get serious about this.
Can I join your club?
Can I join your club?
#7
Registered
Thread Starter
Join Date: Oct 2002
Location: Cincinnati, Ohio
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: #6 drives, what other options are there?
Yea I bet a spanish speaking guy in florida driving a mercedes for a test drive answers it. meanwhile mom is posting an amber alert. What a flashback.
#9
Registered
Re: #6 drives, what other options are there?
Here are a set of IMCO 4x4's rated for 900hp for sale. Because of the standoff box the hole cutout is larger than a six. Perfect for your situation.These came off my MTI and have 5 hours on them. Priced a lot less than new.
http://www.offshoreonly.com/esvon/page-10948.html
http://www.offshoreonly.com/esvon/page-10948.html
Thread
Thread Starter
Forum
Replies
Last Post
TeamPSI
General Q & A
7
03-31-2006 09:48 PM
Dean Ferry
General Boating Discussion
4
11-27-2002 08:09 AM