LOL, how are you and Deanna?

Heading to the river this weekend for probably our last trip out there this year. Have a safe and fun labor day weekend.

Maybe you ought to slap some big ol carbs on them motors and that will get rid of all those silly codes.

By the way just in case you forgot, I still have'nt seen the boat.

Problem found!

Pressure sensor clip was broke and fitting was open enough to get moisture inside the connections and corrode. I cleaned it out and tested, all OK. Now all I need to do is get a new sensor and put back together.

Thanks to all!

Hey Ron and Cord ....

i like happy endings

DIACOM SW is pretty nice! Takes the guesswork out.

u still have one problem-the fact that you arent running the boat like it should be run wot bumpin the rev limiter-

"Sea Pump Pressure 43.46 PSI"

This one jumped right out... 43.46 lbs at idle
Got to love the Diacom

That's a nice looking boat Jeff, but I would prefer a beer and a tour, then again I'll buy you a beer if you ever get that thing off of the river and out on the big pond.

Guess I've had my head in the sand...when did you upgrade to a Sonic?

Deanna and I have been good. This last year has turned around 180 degrees for us. We are both working way too many hours. Gonna have to force some time off before something breaks.

Hp500

Sounds like same thing that happened to me,had a seawater impeller fail and shortly after that the 2 alarm trouble started..
I`ll double check that sensor on the pump...did u replace yours and how much was it?
tnx