Anyone know the part number for ARP...
#1
Registered
Thread Starter
Join Date: Jun 2003
Location: Newport Beach / California
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know the part number for ARP...
Looking for the valve cover stud kit part number for a BBC 540ci. The valve covers i purchased are from Dana Marine. The Black Oxide option, since the powder coat color is red.
This is the first step in the conversion process to an EFI from Arizona Speed and Marine, added a little bling to the project.
Thanks in advance
This is the first step in the conversion process to an EFI from Arizona Speed and Marine, added a little bling to the project.
Thanks in advance
Last edited by Krumbsnatcher; 11-30-2006 at 11:23 AM.
#3
Re: Anyone know the part number for ARP...
I would just put SS bolts in them.You want get them off with headers on it with studs.I also polished the top of the bolt heads. and there cheap
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#4
Registered
Thread Starter
Join Date: Jun 2003
Location: Newport Beach / California
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone know the part number for ARP...
Thanks for the part # Eliminatethis and strip great idea! I think i will check the clearance issue to see if the bolts would be an option, otherwise i will go with the bolts.
I have imco powerflow exahausts currently.
thanks again.
I have imco powerflow exahausts currently.
thanks again.
#5
Re: Anyone know the part number for ARP...
I would also buy the Fel-Pro rubber molded w/ steel shim valve cover gaskets. There reusable.
My Steff's/B&B valve cover look just like yours,I bet the bolts cost about $5.00 at the bolt place or a hardware place .I can measure mine if ya need.The bolts that came with the valve covers was about .125 short with these gaskets.
My Steff's/B&B valve cover look just like yours,I bet the bolts cost about $5.00 at the bolt place or a hardware place .I can measure mine if ya need.The bolts that came with the valve covers was about .125 short with these gaskets.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#6
Registered
Thread Starter
Join Date: Jun 2003
Location: Newport Beach / California
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone know the part number for ARP...
Dana Marine did not send any bolts, just the valve covers. I will let you know if i need the measurements. Once again thanks for the tips!
Its Friday
Its Friday