Any test data on these filters?
http://truckworld.tenmagazines.com/v...video&aid=2990

I saw the filters in Miami and have considered using them. Hydro., how would their performance compare with the better conventional spin-ons? What's the price on them? Eric

Pricing and pictures please!!

What is the recommended procedure for cleaning and how long time does it take ?

Just saw the video from http://truckworld.tenmagazines.com/v...video&aid=2990
It explains how to clean them. The thing that concerns me is that if you wash it you have to wait for it to dry before you can refit it.

Depends if you are going to air dry it, how cold it is, set it out in the sun if available to help it dry,or heat gun, hair dryer blow dry it. as you must figure by now the best way to clean is with a solvent/soap and the wash and blow of with air hose inside of element to outside removing any left over particles that might be wedged in the mesh and then relube O-rings & threads and re-assemble and install so it could be (15 min.) air drying or (5 min.) with air hose and compressor

PUREPOWER! Marine filters
 

{hp-6 replacement filter $249.95} {hp-4 replacement fits/most $199.95 } we also have all remote applications available.thanks Tom, PurePower! Products at Brunner Motorsports

Here are some pictures