That is a great article!! Nice job BG.

Hello Klaw,

Back in the early 70s,, we were running A small block Ford in Modified Stock car Racing out of NJ and got a inLine Autolite set from Ford. Put it on the motor ,,but when we got to the Track, the Tech Inspectors told to go home and replace it with a Std type 4 barrel, Wouldn't even let us try and set it up and run a few laps to see how it ran.
was a neat set up.. We switched to Chevys pretty soon after that.
The Ford Dealer that got the set up for us had a few complete setups for the inline Autolite.
Interesting Article.
Thank you
Jim

One of the problems with the first Autolites, was that they didn't have an idle circuit so you had to keep the engines over 4000 RPM to even keep them running.

[YOUTUBE]http://www.youtube.com/watch?v=rsG4R4L-Gxk[/YOUTUBE]Here's a quick video from the SEMA show.

http://www.youtube.com/watch?v=rsG4R4L-Gxk

Doug .... how much that setup run ?

thats just

Looking at about $1900 for the intake, and carb setup.

Thanks Doug. Very interesting. BOB