|
Originally Posted by Magic Medicine
(Post 2169171)
Smart -ss reply = everyone wanting to buy your product.:rolleyes:
|
Originally Posted by Rik
(Post 2168482)
Uhhhh, probably because the Arneson is still in production.
|
Originally Posted by cuda
(Post 2169695)
Don't your drives use the same boot? Somebody's do.
Oh hell no. Our boot has absolutely nothing to do with sealing water out of the boat or the drive unit. Weismann used the same boot as the KAAMA on their early drive version but when it became apparent that the boot was no longer available, they changed their design. |
Originally Posted by Rik
(Post 2170117)
Oh hell no.
Our boot has absolutely nothing to do with sealing water out of the boat or the drive unit. Weismann used the same boot as the KAAMA on their early drive version but when it became apparent that the boot was no longer available, they changed their design. I knew someone made a drive that used the same boots. Btw, let me know when Terry Bearing quits making those "hard to find parts" they sell over the counter for Kaamas.:rolleyes: |
Please don't blame me for KAAMA's problems.
True, Bearings are Bearings, seals are seals but you are over simplifying the fact that the gears, housings, shafts, etc. cannot be purchased from any place you just walk into. These are no longer in production, and it has been well over 15 + yrs since they were last made. The boot is a service item and just another nail in the coffin so to speak or "writing on the wall" that there are problems with going with the KAAMA drive unit. |
| All times are GMT -5. The time now is 09:55 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.