Offshoreonly.com
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   The ultimate "poor man's Drive" (https://www.offshoreonly.com/forums/general-q/154684-ultimate-poor-mans-drive.html)

2112 04-02-2007 11:11 PM
Originally Posted by monstaaa (Post 2077904)
none if the transom is in good shape.

and if you go 6 youll need to slide the engine forward bout 11-14 inches,

you can also use a waet sump which is less desireable, but more affordable.
Hasn't anyone hung the tranny in the standoff box? If they did, what transom requirements are we talking about now?

Mr Gadgets 04-03-2007 10:47 AM
Check300 put a transmission in a stand off box for #6 on his 30' Check.

Back4More 04-03-2007 10:23 PM
Theres a few Bmax's for sale in the classifieds.

2112 04-03-2007 11:34 PM
Originally Posted by Mr Gadgets (Post 2079990)
Check300 put a transmission in a stand off box for #6 on his 30' Check.
Is there a thread on this?

articfriends 04-04-2007 12:10 AM
2 Attachment(s)
Originally Posted by Mr Gadgets (Post 2079990)
Check300 put a transmission in a stand off box for #6 on his 30' Check.
Look familar??

racesdad 04-04-2007 01:45 AM
call marine turbine technologies in louissiana
STINGER DRIVE.
WE BUILT IT TO HANDLE TURBINE TORQUE AND LIVE.

Mr Gadgets 04-04-2007 04:49 AM
That's the one I was talking about! Bam Transmission in the box.. 1400-1500 hp in front of that.

2112 04-04-2007 10:59 PM
Originally Posted by articfriends (Post 2081204)
Look familar??
What did they do to distribute the stress of all that weight hanging way back there? Looks like it wants to break off in the rough stuff.

Not knocking it, just dang curious. Arctic, You must be busy, have not seen you around as much lately. How is your testing going?

articfriends 04-05-2007 12:15 AM
Originally Posted by 2112 (Post 2082536)
What did they do to distribute the stress of all that weight hanging way back there? Looks like it wants to break off in the rough stuff.

Not knocking it, just dang curious. Arctic, You must be busy, have not seen you around as much lately. How is your testing going?
I been working from 6:30 am to midnight so I'm not around much. I have a guy in Austrailia running a set of prepped gears right now,waiting to hear feedback,I have done atleast 15 sets for various other customers but they are not going to hit the water until this summer.
As far as Check 300,he passed me going 20-30 mph faster than I was going before at wot and I didn't see any fibreglass breaking off his boat:evilb: ,from what I have been told and seen he has his set-up dialed in very well,Smitty


All times are GMT -5. The time now is 01:22 AM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.