![]() |
Remote drive trim switches/stereo remote
I'm interested in putting a remote switch for the drive tilt on my boat. Anyone know if this is something that can be added? I've seen a couple of new boats with merc powerplants that have this. That could be real handy. Also, i have a non marine sony stereo, i don't suppose there is some universal wired remote that works with that, that could be mounted on the back as well?
|
If your sony stereo has an input on the back for a wired remote, you can use a sony marine wired display remote. thier not cheap, but i wouldn't have a boat without one.
|
http://www.access-tech.net/productsRemoteCom.htm
The fact your radio is non marine should have no effect. |
kick azz, my stereo is a Sony CDX-F7700, and i didn't know it but it does have a remote in, kinda looks like a walkman headset jack...........
|
Don't know if this is a model radio, but may not work for mine, bummer........
"Full compatibility for SONYŽ RM-X2C and RM-X4S remote control radios " |
I've found out that my remote, non-wired, is a RM-X141A.....
|
Try these switches for your drives and or tabs,I added a double water proof switch for my drives at the transom and love it for maintance. No climbing in and out of the boat.They also engrave them like merc does from the factory.
http://www.eddiemarine.com/cart/cata...=Switch+Panels Nordic95 |
Originally Posted by US1 Fountain
(Post 2086567)
http://www.access-tech.net/productsRemoteCom.htm
The fact your radio is non marine should have no effect. |
Originally Posted by cloudmaster_321
(Post 2086574)
Don't know if this is a model radio, but may not work for mine, bummer........
"Full compatibility for SONYŽ RM-X2C and RM-X4S remote control radios " It was my impression that all Sony radios that had the 1/8" phone remote jack can use the same remotes. I think you have to stay with in the same brand lines. I'm using a Sony marine remote with display on my Sony head unit (that has the uni-link jack) that does not say they are compatable. Even the Sony tech guy said they won't work together. But they do. :evilb: |
Originally Posted by nordic95
(Post 2086584)
Try these switches for your drives and or tabs,I added a double water proof switch for my drives at the transom and love it for maintance. No climbing in and out of the boat.They also engrave them like merc does from the factory.
http://www.eddiemarine.com/cart/cata...=Switch+Panels Nordic95 |
| All times are GMT -5. The time now is 04:15 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.