26sonic

both bravo 1 drives go up and down evenly but the indicators show they are un even ? the port side will show all the way down ( or in #1 ) and the starboard side will show # 3 on drive indicator gauge . how can I adjust them to read evenly ?

Ted G

iTrader: (1)

You can move the bracket where it attaches to the drive ram to adjust the pointer.

kaama82

iTrader: (1)

There is also adjusment at the other end of the cable under your dash, or wherever it is mounted.

Ted G

iTrader: (1)

That will only give you about a 1/4" change though and it is a b!tch to pull the indicator panel apart, freeking springs everywhere :