Slave Solenoid?
09-08-2021 | 06:38 PM
#11
Registered
Joined: Sep 2021
Posts: 1
Likes: 0
Help
hello,,you sound like u are having same problem. starter just clicks?? i even jumped the starter solenoid and starter worked. i thought it was a ign switch, swapped switchs, then someone in here mentioned the slave soleniod. a new one to me, so mine was right next to distributor, bolted to panel with a large push button fuse. good purchased a couple tomorrow. i will post if that solves problem.
good luck.
good luck.
09-08-2021 | 06:58 PM
#12
Registered
Joined: Nov 2004
Posts: 14,154
Likes: 3,714
From: On A Dirt Floor
If you have 12vokt at small red/yellow at slave from ign when ign turned to start, then jump power across the two big studs on the remote solenoid snd if it cranks, it’s your solenoid.
if you don’t have power at smaller red/yellow from ign when key turned to start, ck its power at neutral safety switch in shifter snd at ign switch.
if you don’t have power at smaller red/yellow from ign when key turned to start, ck its power at neutral safety switch in shifter snd at ign switch.
Last edited by SB; 09-08-2021 at 07:03 PM.
