Corteco Gaskets
07-20-2007 | 05:46 AM
#1
Thread Starter
Registered
Joined: Jun 2001
Posts: 710
Likes: 1
From: Babylon N.Y.
Corteco Gaskets
Anyone stock Corteco gaskets.
Need part # 59312HG or 59230HS
Need gaskets with a 4.100 or 4.130 bore on the fire ring.
This is for a 350 chevy. Trying to avoid going for new heads , the light weight heads just don't have enough meat to seal a stock gasket that was made for an oversize bore and to accomodate several rebuilds. I wanted to buy the pro-topline heads, but the plant is closed for vacation, and will not get them probably until august.
Salt water and cost cutting light weight heads are a bad combo ! The guy I'm doing this for is a real fuss pot ! I have at least 20 pairs of old style heads from the late 60's and early 70's, but will not look the same as what's on the boat, it's a 1990. Thanks, BBB
Need part # 59312HG or 59230HS
Need gaskets with a 4.100 or 4.130 bore on the fire ring.
This is for a 350 chevy. Trying to avoid going for new heads , the light weight heads just don't have enough meat to seal a stock gasket that was made for an oversize bore and to accomodate several rebuilds. I wanted to buy the pro-topline heads, but the plant is closed for vacation, and will not get them probably until august.
Salt water and cost cutting light weight heads are a bad combo ! The guy I'm doing this for is a real fuss pot ! I have at least 20 pairs of old style heads from the late 60's and early 70's, but will not look the same as what's on the boat, it's a 1990. Thanks, BBB
