Need help with cam choice
07-23-2007, 10:52 PM
#1
Registered
Thread Starter
Join Date: Jun 2005
Location: Michigan
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Need help with 454 cam choice
I have a 96' 454 Mag EFI/mp motor. Just had the heads redone and port and polished. Dropped a #1 intake valve. Possible going to change the stock exhaust. I need to know what cam to go with, size, with out having to re-map the ECM. Trying to get some added power without having to change major componets.
Last edited by scooby94; 07-24-2007 at 09:00 PM.
07-26-2007, 07:54 AM
#4
Registered
Join Date: Mar 2005
Location: Sarasota, FL
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
139021 Crane Rocks
The best mid-range cam used in the 502 540 and I use it in my 572's - LOVE THIS CAM!!!!
Good mid range torque and HP, fair idle, performance usage, mild bracket racing, good w/manifold nitrous system, auto trans w/3000+ converter, marine applications: for 454-502+ cu.in. modified engines in performance applications with aftermarket dry pipe exhaust systems. 3400-3800 cruise RPM, 10.0 to 11.5 compression ratio advised. Good w/Roots supercharger, 15 lbs. maximum boost w/8.0 maximum compression ratio advised.
http://www.cranecams.com/index.php?s...21&lvl=2&prt=5
Good mid range torque and HP, fair idle, performance usage, mild bracket racing, good w/manifold nitrous system, auto trans w/3000+ converter, marine applications: for 454-502+ cu.in. modified engines in performance applications with aftermarket dry pipe exhaust systems. 3400-3800 cruise RPM, 10.0 to 11.5 compression ratio advised. Good w/Roots supercharger, 15 lbs. maximum boost w/8.0 maximum compression ratio advised.
http://www.cranecams.com/index.php?s...21&lvl=2&prt=5
