batterey wiring diagrams
07-25-2007, 02:53 PM
#1
Platinum Member
Platinum MemberThread Starter
batterey wiring diagrams
I need a diagram for the wiring of a single outboard engine with one battery switch and two batteries. The goal is to isolate one battery to use with a live well while anchored.
As this is OSO, assume this rigging is on a retired race boat.
As this is OSO, assume this rigging is on a retired race boat.
07-25-2007, 03:13 PM
#2
Charter Member
You want that second battery to be used for only the livewell....not being able to access it for starting or anything else?
Look here at the second and third picture:
http://www.boatfix.com/how/Ele1.html
The second pic will give you the option of useing the livewell battry for starting if need be....the third picture shows how the second battery will be isolated form the rest of the system...you would just need to add the on/off switch to it
Look here at the second and third picture:
http://www.boatfix.com/how/Ele1.html
The second pic will give you the option of useing the livewell battry for starting if need be....the third picture shows how the second battery will be isolated form the rest of the system...you would just need to add the on/off switch to it
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
Thread
Thread Starter
Forum
Replies
Last Post
woody1
General Boating Discussion
14
04-05-2005 01:03 PM
