Ignition timing on HP 500 -97 and later?
07-30-2007 | 11:33 AM
#13
Thread Starter
Registered
Joined: Feb 2007
Posts: 161
Likes: 0
From: Sweden
Just back from a test ride. Ignition set at app. 34 deg@3200 rpm. I'm running a little lean over part throttle so I'll re-jet and take it for another ride.
Another problem is that I don't have a proper prop. I've estimated to run a 24 pitch Bravo I but hasn't got it in my hand yet. Today I run a 27 pitch Laser which was lousy
Btw, a correction to myself; there's only one knock sensor involved on this engine
Another problem is that I don't have a proper prop. I've estimated to run a 24 pitch Bravo I but hasn't got it in my hand yet. Today I run a 27 pitch Laser which was lousy
Btw, a correction to myself; there's only one knock sensor involved on this engine
