Anyone know or have an oil pump pickup for Merc oil pan that I can purchase, or a good source for a new one?

They are 10" deep (well 9 3/4") from the pan-line (including the Milford high volume pump. I live in Cleveland Oh 440 465 6834 Greg

I purchased them for a Mark IV at Nappa for a stock 8 quart pan.

That will be 2" from the bottom of the pan - Not good

A stock 8 quart pan is 8" deep. I will measure when I get home. Learn something everyday.

Oreo,
I will have to check at the shop on Tuesday, but I think the Melling 241S is about as close as you can get. It is deep enough, but not quite as long, putting the pickup location a little closer to the rear of the pan, which might actually be a good thing. I will try to remember and measure one on Tuesday. They are what I have been using without any problems.

Bill Koustenis
Advanced Automotive Machine
Waldorf Md

Go see Dean at Gellner's he's probably got exactly what you need on the shelf. They're shop is in Parma

216-398-8500

Greg,
Sorry, the 241S is works with the 8" deep pan. Wonder if Moroso has something that will work ?

Bill Koustenis
Advanced Automotive Machine
Waldorf Md

Stef's can make a pickup to fit any depth. Dealers on the board are Gellner, Kustom Engines, Sterling, Trick, J C Engines, Zul...

SUMMIT had a perfect 10" Moroso with a nice centered screen -

I am ready to zip the pan and roll her over!!