2 different #4 drives, and #4 experts ?
08-02-2007, 06:28 PM
#1
Registered
Thread Starter
Join Date: Mar 2004
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
2 different #4 drives, and #4 experts ?
Ok just got 2 different #4 drives. The old drives had a bolted rectangular plate bolted under the upper drive shaft that encorporated the fluid resevoir plug in . The new drive , has the fluid resevoir plug in and then an opening under where it looks like a plate should go the shape of a lower case letter H . Is something missing or did the casting just change. I think something is missing because the aluminum is not painted in this cavity in the casting. Sorry no pictures.Old drives had small shafts the new ones have large shafts .
The numbers on the casing are as follows :
D456117 0
11/17/890w3550 RH XS
B455314 0
S 2188 LH XS
Does this mean anything ?
The numbers on the casing are as follows :
D456117 0
11/17/890w3550 RH XS
B455314 0
S 2188 LH XS
Does this mean anything ?
Thread
Thread Starter
Forum
Replies
Last Post
TeamPSI
General Q & A
7
03-31-2006 09:48 PM
Dean Ferry
General Boating Discussion
4
11-27-2002 08:09 AM
