What block is this? V12?
VIP Member
What block is this? V12?
01-05-2008, 12:11 PM
#4
Registered User
Audi.
It's basically 2 V-6 engines using a common crankshaft and more or less siamesed into each other. The left-side outer row of cylinders is a 60-degree V-6 referenced to the right side inner row. It has a 6-throw crank with offsets on each throw journal.
It's basically 2 V-6 engines using a common crankshaft and more or less siamesed into each other. The left-side outer row of cylinders is a 60-degree V-6 referenced to the right side inner row. It has a 6-throw crank with offsets on each throw journal.
01-06-2008, 08:23 AM
#6
Registered
I dont think its anything at all.Looks like a back yard mechanic with some walmarts tools trying to look like someone important.
I had an engine guy just like this once,turned out to be a TOOL saleman.
Nordic95
I had an engine guy just like this once,turned out to be a TOOL saleman.Nordic95
01-06-2008, 11:52 AM
#8
It is an Audi/ V.W. motor. It is used in the V.W. Phaeton here in the states.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
01-06-2008, 07:25 PM
#9
MarineKinetics
Platinum Member
Rob,
That is a clip from a video from Matsuura. The particular segment is the production of a Bugatti Veyron W16 (16 cylinder)block manufactured at the VW factory. The block is machined from a solid billet core. The entire video of this process can be viewed here:
http://www.youtube.com/watch?v=GU32Q6QXtWQ
It appears during the initial machining process the block is a W12, however at the 7:00 minute mark of the video you can clearly see the final stages begin where the additional 2 hole per side are final machined. Also it is evident the block is not an Audi/WV piece by the differences in the span of the valley in the photos below.
The assembly process of the Veyron W16 engine can be viewed here:
http://www.youtube.com/watch?v=Q34xI...eature=related
A video of the Bugatti Veyron claiming “Fastest road car in the world” @ 253 MPH/407 K
http://www.youtube.com/watch?v=lTNlZ...eature=related
Audi W12 block
That is a clip from a video from Matsuura. The particular segment is the production of a Bugatti Veyron W16 (16 cylinder)block manufactured at the VW factory. The block is machined from a solid billet core. The entire video of this process can be viewed here:
http://www.youtube.com/watch?v=GU32Q6QXtWQ
It appears during the initial machining process the block is a W12, however at the 7:00 minute mark of the video you can clearly see the final stages begin where the additional 2 hole per side are final machined. Also it is evident the block is not an Audi/WV piece by the differences in the span of the valley in the photos below.
The assembly process of the Veyron W16 engine can be viewed here:
http://www.youtube.com/watch?v=Q34xI...eature=related
A video of the Bugatti Veyron claiming “Fastest road car in the world” @ 253 MPH/407 K
http://www.youtube.com/watch?v=lTNlZ...eature=related
Audi W12 block
Last edited by rmbuilder; 01-06-2008 at 07:28 PM.
01-06-2008, 11:17 PM
#10
Rob,
The assembly process of the Veyron W16 engine can be viewed here:
http://www.youtube.com/watch?v=Q34xI...eature=related
The assembly process of the Veyron W16 engine can be viewed here:
http://www.youtube.com/watch?v=Q34xI...eature=related
Look at 1.53 It looks to be a forge crank. not billet.
Bob look at 4.53 the block looks cast in the video.
Its weird the macing the back 2 cylinders at a diff time ,maybe its the fixture?
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
