kickin32

I have been searching the threads but no luck yet, I have a 2000 HP 500 and i am looking to redo the heads and want to add some more power what suggestions do you have, cam, exhaust, ? Thanks Kickin32

scarabfun

those have rectangle port heads don't they?

DMOORE

Go with a set of aluminum AFR's.(air flow research). I've heard very good things about them from many engine guys.


Darrell.

BGIII

iTrader: (3)

http://www.offshoreonly.com/forums/s...highlight=wags

TylerCrockett

iTrader: (1)

We have done cnc ported aluminum heads, camshaft, Modified carb, and Msd ignition = 600-620 HP. Tyler

45SS

Tyler where are the new intakes for the fuel injected motors you designed, are they done and perfected yet. If so what numbers are we looking at price wise.

Young Performance

Kicken,
Give me a call, as I can help you with any and all of your engine and boat needs. We can do a few simple mods or take it to over 800 hp. The choice is yours. Everything I build is warrantied.
Thanks, Eddie.

Carder

Kicken, Tyler did my 1999 500 HP's last year, gained about 100 hp, with conservative modifications, jumped about 4 prop sizes to get dialed in... Can;t wait for this spring! Carder

TylerCrockett

iTrader: (1)

We are machining them now. We had to build a fixture to hold them in the cnc machine, make throttle shafts and blades. As soon as I have the first one done it will be shown here. Tyler

kickin32

I know Tyler's motor have rode in several boats with them and they are strong!!, I was trying to get some ideas of what to do . I know my heads need to be redone so i was figuring while i was doing that to do a few other mods. Thanks for your help.