Oil splash guard under intake
#1
Registered
Thread Starter
Oil splash guard under intake
Hi guys, I'm rebuilding a 2nd Gen VI 502 for my Powerplay and it does not have an oil splash sheild that goes in between the lifters and the bottom of the intake. Should I purchase one or do I really not need it anyway. I'm running AFR 315s with Edelbrock Victor Jr intakes.
Thanks,
Frank
Thanks,
Frank
#2
VIP Member
iTrader: (1)
I would add one. It will only help.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#5
Registered
iTrader: (4)
ls1nova,
I saw your your thread for your oil temp gauges. I can't post in the wanted section forum. I just ordered gaffrig oil temp gauges from CP marine for $18ea. They are gauge part # 5520 and sendor 9110 or 9116 for $10. They are solid white gaffrig with black writhing and black needle.
Heres the thread
http://www.offshoreonly.com/forums/s...d.php?t=184038
I saw your your thread for your oil temp gauges. I can't post in the wanted section forum. I just ordered gaffrig oil temp gauges from CP marine for $18ea. They are gauge part # 5520 and sendor 9110 or 9116 for $10. They are solid white gaffrig with black writhing and black needle.
Heres the thread
http://www.offshoreonly.com/forums/s...d.php?t=184038
Last edited by Rookie; 04-29-2008 at 09:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Rambunctious
General Q & A
5
12-13-2007 09:35 PM
Rookie
General Q & A
6
04-17-2004 02:23 PM