Looking for input on the best way to set drive alignment for a 50 Hustler, triple engine, #6 drive boat. I currently have them set dead parallel. Would I be better off setting the outside drives towed in, out or leaving them parallel? If so how much on the toe? Thanks.

good question i have tried dead even and out an 1/8 found steering all over the place and ended at 1/8" toe in

The pair that swing in are trying to come together try them at 1/8 to 3/16 toe in. the pair that swing out set them 1/8 to 3/16 toe out.

Under load you want them parallel.

My 2 cents