Precision Marine, Kenner La.
#11
For any one that needs any kind of computer tuning or HP stuff this is your place. I recently did some upgrades to my 500 EFI , Blower, Aluminum Heads, etc...and it needed some fine tuning to get it right, I sent the ECU down , Mark got it very close the first time but he told me the best way was to tune it in the boat. Well I made the 500 mile trip, keep in mind thaat is each way, and it is now dead on perfect. He and the guys down there run a first class operation, great shop, great hardware and all around just a great bunch of guys. A lot of people think they are EFI guru's but Mark can back it up, when the time comes to build a big EFI Motor this is where I am going.
Hey Mark, fun running in the canal for sure but next time once I have the big tabs on my boat we can run out in the lake. Kind of a strange experience running over 85 in a canal maybe 100 ft wide and only 6 feet deep.....
Thank you!
Bryan
Hey Mark, fun running in the canal for sure but next time once I have the big tabs on my boat we can run out in the lake. Kind of a strange experience running over 85 in a canal maybe 100 ft wide and only 6 feet deep.....
Thank you!
Bryan
Mark and the guys at Precision Marine are one of our #1 dealers and I highly recommend them! He's one of the best in the industry.
Dustin
#12
Registered
Joined: Dec 2004
Posts: 210
Likes: 0
From: IN & KY
He tuned my 575 SCis and my 42 Fountain runs 95 on GPS. I'm still not done with prop selection. He and his guys went way beyond what I expected to get me in and out.
#14
#15
#17
#18
Registered
Joined: Feb 2004
Posts: 3,710
Likes: 2
From: MT. JULIET, TN.




Can't wait for LOTO, I'll have to show you LA boys how to have some fun!!

