02 kits
01-09-2009 | 05:06 PM
#11
Registered
Joined: Oct 2005
Posts: 1,899
Likes: 20
From: Millstadt, IL
Good question, when I originally switched to MPI from Carb I taped a 19mm tread in one of the exhaust ports on the exhaust manafold. If you do this make sure not to hit a water jacket. I did not have good luck with that setup, the O2 sensors did not last. When I switched to EMI exhaust I had them tap threads in each of the exhaust risers. It must be a dry location. My last set of O2 sensors have lasted 3 years so far.
Good luck!
Good luck!
01-12-2009 | 01:01 PM
#12
Registered
Joined: Feb 2004
Posts: 3,710
Likes: 2
From: MT. JULIET, TN.
