Mercury "Perfect Seal" question?
02-27-2009, 08:29 PM
#1
Platinum Member
Platinum MemberThread Starter
Join Date: Sep 2006
Location: Colorado / Lake Norman, NC
Posts: 999
Received 0 Likes
on
0 Posts
Mercury "Perfect Seal" question?
Replacing a gasket etc. on my 600sci heat exchanger.
Service manual calls for "Perfect Seal #92-34227-1" on the o-rings.
Is there an equivalent to this at the local parts store?
Service manual calls for "Perfect Seal #92-34227-1" on the o-rings.
Is there an equivalent to this at the local parts store?
02-27-2009, 09:20 PM
#2
Registered
02-28-2009, 02:44 PM
#4
Platinum Member
Platinum Member
I think the Perfect Seal may be a GM product...at least GM has same sealer in a can labeled GM. I don't think any of the Permatex products are an equal. Perfect Seal is a great sealer for gaskets and the block and intake fittings, etc. Excess also cleans up very easily. IMO, it is worth having a can in your tool box. The shelf life is years...if you tighten the cap 
02-28-2009, 04:46 PM
#7
Platinum Member
Platinum Member
Thread
Thread Starter
Forum
Replies
Last Post
32 thunder
General Boating Discussion
9
09-27-2004 10:33 AM
mikesufka
General Boating Discussion
8
12-26-2002 11:23 AM
