496 stroke build question (accesories)
#1
Registered
Thread Starter
Join Date: Jan 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
496 stroke build question (accesories)
Hi hope you can help. I had a marine 496 stroker built for my boat but all i have with the motor is block,heads ,intake and carb. I need everything else all pullies and accesories. I have a 1996 454 330hp motor i would sell to help pay for everything
anyone know where i can get this stuff or is there a kit i can buy. thanks.
anyone know where i can get this stuff or is there a kit i can buy. thanks.
Last edited by 24sleekcraft; 07-19-2009 at 03:10 PM. Reason: wrong word
#2
Registered
The aftermarket has everything you will need. Check companies like, CP performance, EMI, Dana ect... There are a lot of guys here that can help you also. Be sure you get a good oil cooler.
#3
Registered
Join Date: Dec 2000
Location: Paducah, KY
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
jeffswav is right! After my 496 build I found quickly that my factory 454 mag oil/power steering combo cooler was to small. I chose a thermostatically controlled combo cooler from CP. The unit is fairly expensive but it does exactly what it is supposed to do and is a quality piece.