Hey guys i have 1987 formula 223 and i am converting the outdrive from a alpha to a bravo and i was wondering if there was anything else that would have to be change to complete it

Thanks

I am not an expert but I think you need to drill two more holes for the mounting. And you will need to add a sea pump for sure. The Alpha has the pump in the drive the Bravo does not. I am not sure about the cables or steering.

you should change the coupler over to the bravo coupler also, steering and cables should work fime, just make sure you route the shift properly.

I have HP transom assy's and Bravo 1 drives available. All used, fresh water units. Tight, low hours.Pm or email me if needed. [email protected]