604 c.i. Quad Whipple Project
05-03-2010 | 07:54 PM
#61
Thread Starter
Registered
Joined: Oct 2002
Posts: 2,055
Likes: 91
From: Bowling Green, Kentucky
Kevin,
I'm not real sure what we're going to get. I'll let you know. I'm not sure what kind of set up I'm going to need. All the horsepower will not do well with the wrong set up. The drives are deep and I might have to take the spacers out. I'm planning on some time to get it right.
I'm not real sure what we're going to get. I'll let you know. I'm not sure what kind of set up I'm going to need. All the horsepower will not do well with the wrong set up. The drives are deep and I might have to take the spacers out. I'm planning on some time to get it right.
05-03-2010 | 11:17 PM
#62
Registered
Joined: Jan 2004
Posts: 4,480
Likes: 43
From: Tennessee
Thanks to Eddie for delivering what I wanted. I am very happy with the hp level. I wanted to use a valve train that would give some longevity more than the most hp. A potential 250 hrs before refresh will be the best for me. I can't wait to get the motors in the boat. With all the rain in Nashville now Eddie can probably test the boat with driving it around his block! Nashville is nearly devastated. Eric
Thanks. Hope I was able to help you.
05-04-2010 | 09:14 PM
#63
Registered
Joined: Jun 2004
Posts: 834
Likes: 2
From: Tennessee
They are some beautiful pieces of work. You really need to see Eddie's work in person to appreciate it. Most importantly, you should see the work that goes into his long block prep. That is a place it counts. 250 hours is a bunch out of that kind of power. If anyone can pull it off it is Eddie. I have seen some his 950's with over 200 hours. They do not hiccup.
05-11-2010 | 12:29 AM
#64
Platinum Member
Joined: Jan 2007
Posts: 1,460
Likes: 77
From: Omaha - LOTO
Eric,
The motors turned out great...Eddie was working on them when we brought my boat down to him last month.... Good to see that they dyno'd out so well. Will be waiting to see some pictures of them when you run them in you boat...
Looking forward to seeing mine when Eddie get's them finished...Congrat's
Jim
The motors turned out great...Eddie was working on them when we brought my boat down to him last month.... Good to see that they dyno'd out so well. Will be waiting to see some pictures of them when you run them in you boat...
Looking forward to seeing mine when Eddie get's them finished...Congrat's
Jim
05-11-2010 | 04:59 AM
#65
Thread Starter
Registered
Joined: Oct 2002
Posts: 2,055
Likes: 91
From: Bowling Green, Kentucky
Jim,
I have seen your engines at the shop. They are looking great. Nashville is only an hour a way from me and I have been able to get down there several times to see the engines going together. Yours ought to come together fast now. What color are you going to paint them?
I have seen your engines at the shop. They are looking great. Nashville is only an hour a way from me and I have been able to get down there several times to see the engines going together. Yours ought to come together fast now. What color are you going to paint them?
09-24-2010 | 07:21 AM
#70
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
