Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   New 8.2L Mercruiser engine (https://www.offshoreonly.com/forums/general-q/225229-new-8-2l-mercruiser-engine.html)

coolcruzin 03-30-2015 03:29 PM

Boat is still at the the builders.
They are waiting on Mercury to come up with a new elbow to help the cooling .
What Merc has will not work on the setup .Just a basic set up 4" exhaust above water line .
It is all on the mercury to come up with a or solution .
The Mercury Rep. been down there a few times from what I was told.

coolcruzin 03-30-2015 03:32 PM

I was reading the board to see if there has been other problems.
My set up is basic. Something must be wrong and I'm not hearing anything .

dereknkathy 04-02-2015 01:18 PM

Are the exhaust ports different from other bbc heads?

Brembofreak 04-02-2015 01:23 PM

NO!
I have now CMI and checked with Gasgets! Exhaust ports are same than 502 or 496 Heads!
Standart Exhaust at engines without Cats are same than 496!
Michael

BrianH244 05-07-2015 12:43 AM

Update, my boat ran 76 mph with a 26 bravo and 80 mph with a labbed 28 bravo. This was with the stage 2 PCM upgrade from whipple. Stock it ran about 68-70. So that's a pretty damn good gain.

Brembofreak 05-07-2015 12:56 AM

The jump from Mag with Cats to HO without is a big powergain.
Also your boat has a very fast,only 21 degree hull ,on straight water.
Maybe you let us know the RPM with your diffrent props??

I run last year 70mls at 4530 Rpm with 25 Mirage Plus.

I hope my 232 runs 75-76 with stage 2 and Cmi.I will see next day and let you know.My hull needs some more power i think.
Best Regards
Michael

coolcruzin 05-07-2015 01:36 AM

"Update, my boat ran 76 mph with a 26 bravo and 80 mph with a labbed 28 bravo. This was with the stage 2 PCM upgrade from whipple. Stock it ran about 68-70. So that's a pretty damn good gain."


Very good results !

BUP 05-07-2015 05:06 PM

So no fix or any conclusions from Merc ? and how about the other guy that almost burned down his boat ? Just asking.

I know most likely will see this same problem at some point in time this year.

coolcruzin 05-07-2015 10:32 PM

BUP>They change the S pipe to a full alum cast style .The one I had on there was some real nice fabricated stainless 90's deg bend style .I have see these many of time .
not uncommon at all.
The idea is the water will flow better being a full 4" curve .
I will be out on the water in two weeks .
The boat the had the fire was also changed and his boat was actually water tested with good results .
Cobra took care of his boat and looks very nice .The guys down there are good people.

Hope this is the fix . Time will tell .

BUP 05-07-2015 11:44 PM

Ok thx I thought someone had a straight thru the transom exhaust and some one else had a silent choice app. Straight thru exhaust would not apply here - correct me if I am wrong and of course this could come into play if there was angles needed in the first install design that caused this problem.


All times are GMT -5. The time now is 08:49 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.