![]() |
Originally Posted by mrfixxall
(Post 3077656)
What is your max rpm trimmed out?
|
Originally Posted by mrfixxall
(Post 3077656)
What is your max rpm trimmed out?
|
4.5 to 5 is a sizeable spread ! Either leave the old lady & the cooler on the dock or go one size smaller prop. :drink:
|
Fixx
Originally Posted by ZXXX Donzi
(Post 3077662)
What do ya think fix?. Sounds like a prop issue.
do you have through hull or through prop exhaust? |
I used to have an 89 scarab excel w/350 (260hp) I ran a 21p 3 blade (no trim tabs). It did stand a little tall in the front out of the hole but leveled out fairly quick.
|
Originally Posted by Jeff P31
(Post 3077700)
4.5 to 5 is a sizeable spread ! Either leave the old lady & the cooler on the dock or go one size smaller prop. :drink:
|
Originally Posted by fastscarab22
(Post 3077401)
With the 4 blade it will ride nicer, and you will get better out off the hole , rember you need a round ear prop for a scarab ( bow lifter not a stern lifter like a hydoautomitve )
When I bought mine it had a whale tail which didn't help.also had a 23p Mirage on it. I run a modded 454. |
Fixx
Originally Posted by rexmitchell
(Post 3077745)
Sorry for the confusion, I really haven't look at it that closely normally its at 5000 WOT.
|
Originally Posted by mrfixxall
(Post 3077770)
reason asking about through hull or through prop exhaust is theirs a vented propeller that makes the boat jump on pland better..
|
What you need to do is tell us what prop you are running and then we can go from there, a lot of these guys are running bb not sb with more power than you and it does make a differnce to get on plane .When you are loaded to go out is all the wait in the stern ( putting stuff under the bow might help )
|
| All times are GMT -5. The time now is 09:34 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.