Im changing to crossovers w/ bypass, as you see in the picture i have a water temp sensor (im guessing) in my stock t/ stat housing, and dont see anywhere to put it with the crossover.

there should be a plug in the intake manifold you can remove and install it there.

only 1 in intake already has a sensor in it.

my aftermarket therm housing has a spot where I put mine...

yea mine does not, i guess i could have it drilled and taped to fit the sensor.

try hardin marine.. they make a 1 inch spacer that can fit 2 sensors in them.. I have it now.. works fine

Found it thanks

Drill and tap the ss thermostat housing for a sensor..

Where at in the top of it i would guess.

i would rather see it before the thermostat like stated in the intake manifold but if their is no other option then i would work their..